Angie’s Blog

I changed out my ignition switch because I had to wiggle the key to get the radio/brake/turn signals to work and I was also looking for the short that’s causing my dash gauges to not work.
Like I previously mentioned, when you change out your ignition switch you want to replace the plug that plugs into [...]

Read the rest of Replacing the Ignition Switch – 1969 Mustang

I received my circuit board last week and proceeded to reassemble the dash cluster that weekend. If you bagged and labeled everything properly while taking it apart (part 1) then reassembling shouldn’t be a problem. As an after thought, I wish I had taken a picture for reference but it went back together [...]

Read the rest of Replacing the dash circuit board – part 2: Trial and Error